Multi-input Voice Dialer/Announcer Fully programmable multi-input, multi-number auto dialer and digital announcer, designed for emergency and non-emergency message notification. Has 8 dry contact inputs which when tripped will sequentially dial up to 8 different phone numbers and play a recorded message corresponding to the input tripped. Stores up to seven 16 digit phone numbers & one 32 digit phone number per input. This unit is capable of local or remote recording of up to 8 different messages (one per input) with one minute of total record time.
Applications:
-
Alarm Dialer
-
Security/burglar/fire alarm notification
-
System alarm or equipment malfunction notification
-
Environmental warning notification
-
Automatic telephone messaging paging
-
Store Caster
-
Provide assistance or promotional announcements in department stores, grocery stores, hardware stores, gas stations, etc. "Customer assistance needed in aisle 13..."
Features:
-
Non-volatile memory (no batteries required)
-
Stores up to (7) 16-digit numbers and (1) 32 digit phone number per input (64 total)
-
60 total seconds of record time
-
Programmable message repeat counter
-
Programmable lap counter for dialing groups of phone numbers
-
Eight programmable normally open/closed inputs
-
Programmable ring delay for remote programming and alarm polling
-
Pager compatible
-
Remote security and access codes
-
Programmable store caster mode
-
CPC break detection
-
Local or remote programming and recording
-
RS-232 port for programming via a P.C.
-
Compatible with the RC-2A and RC-3 remote DTMF controllers
-
One year warranty
-
Made in the USA
Specifications:
-
Power: 120V AC/12V DC 500 mA, UL listed adapter provided
-
Dimensions: 187mm x 127mm x 45mm (7.37" x 5.0" x 1.75")
-
Shipping Weight: .68 Kg (1.5 lbs)
-
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% noncondensing humidity
-
Talk Battery: 13V DC
-
Touch Tone Dialing: 120 ms on/off
-
CPC Detection Time: 320 ms minimum
-
Message Record Time: 60 seconds
-
Sampling Rate: 64 K (equivalent)
-
Momentary Trigger Input: 100 ms minimum normally open/normally closed
-
Connections: (2) RJ11 jacks for 600-ohm audio output and telephone line/phone, (1) 9 pin RS-232, (1) 12 position screw terminal block for dry contact trigger inputs
|
|
