Viking Remote Access Device RAD-1 The RAD-1 allows you to call from any Touch Tone phone then remotely access 1 or 2-way paging systems, service observers, digital recorders, church programs, etc. The unit connects to any C.O., CENTREX, or PABX line, answers on the first ring and disconnects on CPC, time out, or by dialing "#7". A 600 ohm output and relay contact is provided.
Applications:
- Remote Access To:
- Paging systems (Viking’s CPA-7B or PA-2A)
- Service observers (Viking’s SO-24A)
- PABX, Centrex or Key System features (DISA with security)
- Voice mail, dictation equipment or modems
- WATS, FX or TIE lines (through a PABX or as a line extender)
- Advertisements, radio or church programs
- Audio monitoring for security purposes Other calling zones (line extender)
Features:
- Programmable 6 digit security code
- Two programmable levels of access
- Programmable toll restriction
- Allows 1-800, 1-888 and 911 calls
- Disconnects on CPC, call time out, toll restriction, or by dialing #7
- Programmable 5 second to 50 minute call timer
- Provides a 500ms hookswitch flash to access features on PABX, Centrex, C.O. lines
- Provides a 2 second disconnect for new calls
- Bridges any loop start/ground start line or analog PABX station to a 600 ohm audio input
- Auxiliary contacts available for systems that need a dry contact closure
- Non-volatile memory (no batteries required) with security)
Specifications:
- Power: Telephone Line Powered (24V DC 20mA minimum)
- Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
- Shipping Weight: 1.13 kg (2.5 lbs)
- Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity
- Relay Cotact Ratings: 220V AC/DC @ 1 Amp resistive
- Audio Loss (through unit): 1 dB
- Connections: (2) RJ11 modular jacks, five position screw terminal strip
Browse the Product Manual [Download: PDF, 220KB]
|
|
