The Valcom VIP-801A Network Audio Port enables voice access to a single zone of one-way paging over an IP network. This allows page zones to be extended anywhere network connectivity is available. The VIP-801A can be programmed as a SIP device for connectivity to virtually any VoIP telephone system.
Key Features:
-
Valcom networked page zone extender
-
1 Audio Input
-
2 Audio Outputs
-
2 Programmable form C relay closures
-
1 Contact Closure Input
-
1 SIP identity for registering to a VoIP telephone system
-
RJ-45 for network connection
-
No server required
-
Front panel activity LED
-
AUX Audio input via RCA jack
-
AUX input music mutes during page
-
Output control contact closure provided during paging output
-
Contact closure available for: audio indication and door unlocking
-
Protocols DHCP, IGMP v3, UDP, TCP, HTTP, Telnet, FTP
-
Barrel jack for optional DC power
-
Power over Ethernet (PoE) 802.3af compatible
-
Voice Algorithm: G.711 (64kbits/s)(ulaw) / echo suppression
-
Input: analog device interface (600 ohm input impedance, VOX and contact closure input)
-
Output: analog output interface (less than 50 ohms output impedance; frequency response: 200Hz - 3400Hz; relay closure available)
-
Voltage: 24 Vdc @ 250 mA; IEEE 802.3af compatible, class 3 device; regulatory: FCC Part 15 Class A
-
Compatible with 25 or 70 volt amplifiers
-
Removable screw terminal connectors provided for audio and relay interfaces
-
Does not include power supply (Sold Separately Mfr. Part #: VIP-324)
**Power Supply Not Included**
|
|
