Viking Two-Way Line Emulator Allows 2-way communication between analog equipment with a cost effective, easy to use method of conducting on-site demonstrations. When either device goes "off hook" the other rings until answered.
Applications:
-
Dedicated point-to-point communications (ringdown circuits)
-
Program Telecom products without a phone line
-
Connecting dictation equipment to Electronic Key Systems
-
Intersystem TIE line
-
Courtesy phones
-
Demonstrating telecom equipment at trade shows, meetings, etc.
-
Connecting modems together
-
Prison phone communications
-
Programming PC based voice products
-
Replacement for Proctor Model #46220 and Proctor Model #46240 (requires 4 DLE-200B's)
Features:
-
Compatible with fax machines and modem speeds up to 28.8 kbps
-
Precise dial tone 32VDC talk battery
-
Switch selectable ring cadence
-
Provides CPC breaks after hang-up on either port
-
Switch selectable audio attenuation
-
Provides 2 seconds of precise dial tone after off-hook
-
Provides ring back signal to calling device
-
One or two way ring down capability
-
Jumper selectable ring count
-
Ring down and dial tone off mode (ideal for prison phone communications, etc.)
Specifications:
-
Power: 120V AC/13.8V AC 1.25A, UL listed adapter provided Power Supply
-
Current Draw: 600mA maximum
-
Dimensions: 120mm x 70mm x 35mm (4.75" x 2.75" x 1.38")
-
Shipping Weight: .72 kg (1.59 lbs)
-
Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% non-condensing humidity
-
Ringer Output: 2.0 REN load
-
Loop Length: 4.2 km (2.6 mi) maximum - 24 AWG twisted pair
-
Dial Tone Level: -20dBm with 600 ohm load
-
CPC Break Time: 2 seconds or 150 msec (selectable)
-
Maximum Data Speed: 28,800 bps
-
Connections: (2) RJ11 jacks
|
|